Tuesday, June 18, 2013

Symphony FT10 Charging problem Solution

Now I share how to solve symphony ft10 charging problem and ft10 charging jumper.Its repair really very easy.Any one can be repair it.Just following bellow picture and work step by step.




How to do this work: At first charge with another charger then see result if problem still then open phone and check charging connector then check charging voltage next check red mark jumper then check blue mark parts.


You may also like:

Symphony FT10 headphone problem solution

Description of this problem : Show headphone logo without headphone.That means you do not have put / not connected headphone with  phone but showing headphone logo.So you do not  listen call sound.Now I showing how to repair it.

1st solution



2nd solution



How to do this work: If you face this problem then first connect headphone and disconnect 4/5 time and see result if result same then first apply 1st solution if not solve then apply 2nd solution.

you may also like:

Symphony FT10 Over battery temperature provlem solution

Symphony ft10 mic problem solution

This is the tips of symphony FT10 mic problem solution and ft10 mic line ways.Mic problem is very common problem so its repairing solution is very useful.Now I share how to solve symphony ft10 mic problem.






How to do this: First check phone with a call If you found mic problem then open your phone then change microphone next replay check with call If you see problem still then check red mark jumper.

You may also like:
symphony T44 mic problem solution
symphony d70 mic ways
Symphony d25 mic solution


Symphony FT10 Over battery temperature provlem solution

Today I showing how to repair symphony ft10  over battery temperature problem repair.This  problem is rare but its very useful solution.View below picture read below note then work.




How to do this work: Very simple ways you can repair it.If your phone has this problem then first check phone other battery.If problem still then check red mark jumper if you found damage this line then make this jumper.


You may also like:

Friday, June 14, 2013

symphony t44 no service solution

This solution help you Symphony t44 no service problem repairing.No service is a network problem.when damage any parts of network part.but maximum time when damage PA then has this problem.





How to do this: If you face this problem then first check antena ways then rehot red mark parts and see result.If problem still then change pa.

Symphony d25 mic solution

This is symphony d25 mic solution.Microphone problem is very common problem.Its repair very easy Now I showing how to repair it.this solution also work mic low voice problem.



How to do this solution : Check or change microphone next check mic line ways if line are not ok then make this jumper.

You may also like:

Symphone t44 mic solution
Symphony d70 mic solution


Symphony t44 Mic solution

This is symphony t44 mic problem solution.It also work  symphony t44 mic line ways.mic not work and mic low voice solution.



 

How to do this : If your phone has this problem then first change microphone next check mic line ways,If damage mic line then make this jumper.

You may also like



Symphony t44 Bad Contact Charger

This is symphony t44 warning Bad Contact Charger  problem repair tips.Very easily repair  This problem. see the below picture and work step by step.





How to do this : If any body face this problem then first check charger or charge phone with another charger.after that check or change red mark parts.

You may also like


Symphony t44 dead solution

There are  many reason for mobile phone dead.They are water damage,drop on the Floor,and misuse.Now I showing how to repair it.There are two type problem for phone dead one of them software problem and another is hardware problem.


 


How to to do this: Software problem solution : If you thing it is software then first read flash file with your software repair device next format  and see result.If you see result same then write flash with new file.

Hardware problem solution : If your phone has dead for water damage then first wash full pcb goodly and hit with stan lite minimum 10 minute and see result .If result same then rehot red mark ic.


You may also like :


 

Sunday, June 9, 2013

Mobile phones first aid for fall into water

Your phone may be fall into water.If you face this situation what to do  then.Now I showing what to do then.




1. At first remove battery then
2. Remove sim card and memory card  next
3. Remove water with cloth or tissue then
4. Take dry to sun temperature If do not possible dry to sun temperature then you can dry to electronic bulb.
5. When you understand there are no water in your phone then put battery and on your phone.If your phone not on then check your phone  with other battery.
6. If your phone not on then go to nearest service center and repair your phone.
/* page navigation script safiq */ /* Facebook like button safiq */ /* page navigationscript safiq */
/* Facebook like button safiq*/